Serving Terry, MS & nearby Open 7 days · Mon–Fri 7AM–8PM Licensed & insured · 90-day warranty (844) 442-1999
Call for an upfront quote(844) 442-1999
Serving Terry, MS

Ice Flaker Repair in Terry, MS

When your ice flaker stops working, it throws off the whole day. Our technicians repair ice flakers in Terry, MS, starting with a proper diagnosis and an upfront quote before any work begins.

Call (844) 442-1999 Book online
  • Upfront quote before work
  • 90-day parts & labor warranty
  • Parts matched to your model
  • Same-day service when available

Request service

Tell us what's wrong. We'll call you back to schedule.

We only use your details to arrange the repair. No spam.

or call now
(844) 442-1999
Licensed & insuredFully insured technicians
90-day warrantyOn parts and labor
Upfront pricingApprove the price first
248 appliance types426 brands serviced
Overview

How we repair your Ice Flaker

A commercial ice flaker produces soft flake ice for seafood displays, produce cases and healthcare use by scraping ice from a refrigerated cylinder with an auger. Every ice flaker combines a water inlet valve, a freezing surface or mold, a harvest system and sensors that tell it when the bin is full. A technician checks water supply and pressure, scale buildup and sensor operation before testing the refrigeration side.

Health inspectors look closely at ice machines, and a down machine can stop drink service, so commercial ice calls get priority scheduling and cleaning recommendations.

Ice Flaker repair at a glance

  • Typical repair cost$120–$400
  • Typical service life5–10 years
  • Warranty on repairs90 days parts & labor
  • QuoteUpfront, before work
  • Same-day visitsWhen available
Call (844) 442-1999
Diagnosis

Common Ice Flaker problems we fix

What usually causes each symptom, and what our technician checks to confirm it.

Auger motor tripping

Likely causes
Scale binding the auger, worn bearings, or a failing gear motor.
What our technician checks
Gear motor amperage is measured and the auger and bearings are inspected.

Water leaking from the evaporator

Likely causes
A worn auger seal or a cracked water reservoir.
What our technician checks
The seal and reservoir are inspected.

Ice storage bin not draining

Likely causes
A blocked bin drain or a drain line without an air gap.
What our technician checks
The drain line and air gap are inspected and cleared.

Wet flake ice

Likely causes
High water level in the reservoir, warm inlet water, or a low refrigerant charge.
What our technician checks
The float and water level are checked and system pressures are measured.

Unit stops on a fault

Likely causes
A low water safety switch, a high-pressure trip, or a gear motor overload.
What our technician checks
Fault codes and safeties are checked to find the cause.

Low flake ice production

Likely causes
Scale on the evaporator cylinder, low water flow, or a dirty condenser.
What our technician checks
The technician measures production, checks water flow and inspects the cylinder and condenser.
Before you call

Quick checks you can do safely

  • Confirm the water supply is on and the filter is not clogged.
  • Clean the air-cooled condenser grille.
  • Check that the bin drain is not blocked.
  • Make sure the bin level control is not covered by ice.
  • Check the breaker and power switch.

Safety first: Disconnect power before opening the evaporator area, and use the recommended ice machine cleaner with gloves and eye protection.

Still not working?

Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.

(844) 442-1999

Seeing a code? Try our error code lookup or troubleshooting wizard.

How it works

Our 5-step ice flaker repair process

  1. Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
  2. DiagnosisThe technician inspects and tests the ice flaker to find the actual cause, not just the symptom.
  3. Upfront quoteYou get a clear price before any work starts. No surprise charges.
  4. RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
  5. Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Pricing

Ice Flaker repair cost and lifespan

Typical repair cost$120–$400
Typical service life5–10 yrs

National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.

Parts we replace most often

  • Auger
  • Gear motor
  • Auger bearing
  • Auger seal
  • Water float valve
  • Bin level control
  • Condenser fan motor

We match every part to your model and serial number.

Maintenance

Keep your Ice Flaker running longer

  • Sanitize the bin for health code compliance.
  • Inspect the auger and bearings yearly.
  • Descale and sanitize the machine on the schedule the manual recommends.
  • Replace water filters regularly.
  • Clean the condenser monthly.

Build a maintenance plan

Create a printable monthly, quarterly and yearly checklist for every appliance in your home.

Open the schedule generator
Local service

Ice Flaker repair in Terry, MS

Long, humid summers in Mississippi push refrigerators, ice makers and AC units in Terry hard for most of the year.

We provide ice flaker repair throughout Terry, including ZIP code 39170, and in nearby Byram, Crystal Springs and Raymond.

In coastal parts of Mississippi, salt air speeds up corrosion on coils, burners, fasteners and electrical connections, especially on equipment installed outdoors.

Also serving nearby

Brands

Ice Flaker brands we repair

FAQ

Frequently Asked Questions

How much does ice flaker repair cost in Terry, MS?

Most ice flaker repairs fall roughly between $120 and $400, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.

Can you repair my ice flaker the same day?

Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.

Is the repair guaranteed?

Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.

Which brands do you service?

We work on all major brands, including Hoshizaki, Manitowoc and Scotsman.

Should I repair or replace my ice flaker?

A typical ice flaker lasts about 5 to 10 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.

Related

Other ice makers and ice machines repairs

More repair services

Get your ice flaker fixed in Terry

Upfront quote before work starts · Parts matched to your model · 90-day warranty

(844) 442-1999 Book online
Call now Book